Showing posts with label sea hood. Show all posts
Showing posts with label sea hood. Show all posts

Sunday, February 10, 2013

A Flurry of Activity - The Blizzard of 2013

As is usual, things we enjoy in life often get interrupted by, yep, that's right, LIFE!  Well, living in the Northeast offers a robust variety of sailing, seasons, and weather.  In the Winter its always a challenge to pursue a full agenda of boat work.  We have been lucky so far this year and have made decent progress on Harmony.  However, this past weekend was another story!

The Blizzard of 2013 arrived Friday, February 8, and gave us a great excuse to stay home.  Small note:  the entire state of Massachusetts was closed to traffic, and, besides, who in their right mind would venture out into the raging storm - not us.  Our work agenda focused on projects in the home shop, which do need to completed.

Anyway, before we could even think of epoxy, varnish, or teak, we had to shovel out from the roughly 30 inches of snow we received Friday night.  The wind blew in gusts over 30 mph causing significant drifts.

A 4 - 6 foot snow drift on the side porch
Thank goodness that the power stayed on.  However, our generator would have kept all systems operational and the house warm.  When we got up in the morning, the storm was still raging.  So we cooked a hearty breakfast and enjoyed our coffee watching the snow accumulate.

The snow stopped and the sun came out briefly around 10:30 am.  OK, time to attack the mess.  Thank God for the snow blower, but I still had to shovel the walkways, porches, and, of course, the access to the shop.  The snow was powdery, but there was still a lot of it!
An access "tunnel" to Beth's farmers porch

The front door and snow over the window sills
After about 6 hours of snow duty, I called it a day.  My arms were so tired from shoveling out the roughly 6 foot drifts on the porches and around most doors, that I had no desire to sand epoxy fillets on the sea hood (a.k.a. turtle hatch) I had started the day before.
The driveway cut into 30 inches of snow
So, I made a symbolic check of the metaphorical anchor, shut the companionway, and wrapped myself around a soothing glass of wine.  Watching the sunset from the cockpit of Harmony will be wonderful!

Fair Winds and Following Seas!

Saturday, December 29, 2012

A Sea Hood - Not a Deliquent Item

One of the first things we added to Poetry's deck was a turtle hatch or in modern parlance, a sea hood.   This structure covers the sliding companionway hatch and prevents water, green or otherwise, from leaking into the cabin via the companionway hatch.  Another way to look at it, the sea hood is a garage for the companionway hatch.
Poetry's stout and secure teak turtle hatch or sea hood
On Poetry, I outdid myself and made the structure out of teak.  Roughly $800, in 1996 dollars, later we had a very nice looking and almost iron clad structure.  However, it was a real pain to keep good looking.  I mounted a canted dash onto the dodger was attached and to help direct water down onto the side decks.  It was solidly bedded and securely through-bolted to the cabin top.  It worked and continues to work after almost 20 years.

Harmony will need a new dodger, as well as a bimini.  So, before I have Sperry Sails construct the dodger, I need to consider what to do about a sea hood.  Harmony did not have one, but I had seen some nice ones on both Westsail 32's and Westsail 42's.
Harmony's companionway hatch is large and inviting to a boarding sea
However, I did not want to make it out of teak.  Firstly, the cost of such a thing would be huge, and we already have enough teak on deck to keep us busy varnishing in perpetuity!

After lengthy consideration, I decided to make the sea hood out of merranti plywood sandwiched between epoxy and glass.  This way I can have a stout structure, but build in some ease in maintenance.  I will attached a canted teak dash on its aft end in order to attached the dodger and direct boarded water off the cabin top.

The trick to this is making the sides and front mimic the angular proportions of the cabin top.  Hopefully, this will allow the sea hood to blend in and look like it is a natural part of the structure.  Beyond that the angular sides will help deflect spray and add to the structural integrity.
Canted merranti front and sides with temporary support struts (black items are shims to help maintain the proper angle for the mold)
So, I needed to fashion not just a mold, but a mold in which the main panels are the actual sides.  It was relatively easy to measure the angles of the sloped cabin sides and front.  Once the camber of deck was scribed, it was a simple task of adjusting either the sabre saw or table saw to that angle.  The front and sides were joined with temporary struts to keep the angles true and to provide an attachment for the top.

Laminated sheets of 1/4 inch merranti plywood forming the top of the sea hood
The top was constructed by laminating two sheets of 1/4 inch merranti plywood over the top.  Because of the temporary struts having been planed to the deck camber angle, the sheets of merranti took on the same camber as the deck.  The sea hood was to be attached to the deck through a 1/4 inch fiberglass sill that would be formed during the glassing of the merranti sandwich.

By screwing and bedding the sea hood with this lip, I could remove it to refinish the companionway hatch whenever necessary.  The bedding would prevent any water intrusion and, more importantly, prevent the sea hood from being ripped off by a huge boarding sea.
The construction of the sea hood has started, but will be completed over several weeks of work.  A lot of time has been spent in the early stages to ensure the lip camber and height of the sea hood fits the deck properly.

As I continue to work on this item, I will provide updates.  However, I do need to have this completed by late Spring or early Summer in order to have Sperry design a proper dodger.  So, this sea hood will not be a delinquent item, for sure.

Fair Winds and Following Seas!